Cleaning Purifier Solder Fume Extractor with Two Arms 75mm Diameter
pre-filter 5pcs, middle filter 1pc, main filter 1pcs
2 x 150m3/h
Length of Duct:
Dia.75mm or 50mm
Less than 60dB
Waterun Fume Purifying and Filtering System is for cleaning of both
particles and gases. It is designed to filter the harmfu
substances, such as hydrocarbon and cyanide, during the process of
soldering, tin dipping in the solder pot, laser marking and
carving, printing, etc. It catches harmful smoke with freestanding
ducts and adjustabl air volume to significantly improve your
It has a triple-filter system:
1) Pre-Filter: the large-size pad filter can filter large particles
2) Middle Filter: it filters the bigger powders for prolonging the
main filter's life.
3) Main Filter: it includes HEPA (high efficiency) filter and gas
filter. The HEPA cleans the gas and powders filtering from the
pre-filter and then carry them to the gas filter. which with the
carbon and other chemical combination, filters off the deleterious
substance and then outputs the clean air.
- It realizes powerful suction with quiet operation;
- Brushless motor ensures low noise, stable performance, and long
- Triple-filter design. Pre-filters and Main Filters can be
replaced separately for prolonging the filter‘ s life time and
cutting down the cost:
- Built-in air cycling filtering system avoids discharging the
cool/hot air to outside;
- It is easy to install and no need to lay pipelines;
- The airflow is freely adjustable according to working
- Freestanding flexible ducts facilitate production changeovers;
- Ducts can be bent or lengthened as desired and maintain their
shape after adjustment, letting you place them exactly where
suction is needed.
Waterun Technology Co.,Ltd manufacturing a variety of high quality
air purification systems for filter the harmful substances. Our
line of floor, bench top, mounted and portable units serve a
variety of applications including welding, soldering,
manufacturing, laboratory and pharmaceutical operations.
soldering fume extractor
laser cutting, laser engraving and marking
welding, laser welding,Argon Arc welding
medical, moxibustion, moxa-moxibustion
beauty fume extraction
Pharmaceutical and laboratories, chemical
- Compared with the products from foreign countries, our products
in terms of the effect is almost the same, but the majority of our
products are less than USD2000, so our products are cost-effective,
and the use of more affordable cost. The products from abroad
mainly purify the viruses and bacteria as the main direction of
governance. In China not only to purify viruses, bacteria, but also
clean harmful smoke pollution. WHO estimates that there are over
200 million people deaths each year due to inhalation of indoor and
outdoor air pollution in small particles.
- Our company uses a brushless motor, compare with the ordinary
motor, this motor speed is higher, lower noise, it does not require
maintenance, but longer product life span. Self-developed impeller,
better quality than ordinary plastic impeller, more stable, more
powerful suction. The unique tiered filter design, can effectively
purify the toxic and harmful substances in the air, such as
formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and
use of low cost.
1. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2)
energy saving (3) easy installation, flexible remove (4) low cost
(5) reduce the incidence of diseases and major diseases, and health
is priceless (6) to reduce unpleasant smell (7) to reduce dust and
other harmful substances, and so on.
2. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000
hours, consider environmental factors. Usually it can use 4-5 years
without any problems.
3. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we
suggest not more than 1.5meter. For multi-station, the total pipe
length should not exceed 10 meters.
4. How long need to to replace the pre-filter, middle filter and the
Answer: 1. Pre-filter : normally needs to replace by 1 months
2. Middle filter: normally needs to replace by 3 months
3. Main filter: normally needs to replace by 6 months.
5. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent
6. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
7. Can our fume extractor can eliminate 100 % the smell ?
Answer : Not 100 % , but we can minimize it .