Francis Hydro Turbine / Francis Water Turbine for Capacity below
20MW Hydropower Project
1. Water head: 10m -- 300m
2. Power: 0.1MW -- 30MW
3. Frequency: 50/ 60hz
4. Output Type: 0.4KV, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Francis turbine, you should send some
key parameters (such as net head, flow discharge, unit number,
frequency, voltage) in inquiry.
Normally, Medium size and larger Francis turbines are most often
arranged with a vertical shaft, Small Francis turbine always
arranged with horizontal shaft, but it is not absolute.
The Francis type turbine is mostly suitable for hydropower stations
with medium or high head from 10m to 300m. They are in both
vertical or horizontal shaft arrangement and could be vastly
selected by the hydraulic power stations.
lts feature is that the water flow enters the runner inward in a
radial direction , changes direction gradually and then passes out
axially. Francis turbine is characterized by reliable operation,
simple construction and high efficiency, etc.
Normally, we adopt the horizontal Francis with capacity below 5MW,
runner diameter below 90cm. And the vertical Francis with capacity
Main Structure of Francis Hydro Turbine
This hydraulic turbine type is Horizontal shaft Francis. A inlet
valve is equipped in front of the spiral casing of the turbine.
When viewed at the turbine from the generator end, the rotating
direction of the hydraulic turbine is clockwise .The turbine is
horizontal shaft and metallic spiral casing and the stainless steel
runner. This unit has two bearings, assembled on the generator
seat. The principal parts of the structure of turbine as follows:
3) Rotating parts
5) Draft tube
6) Layout for water,instruments and pipe-line
Water flows through penstock of the power station, Butterfly valve,
expansion pipe, inlet tube, spiral case and wicket gates into the
runner, and then it drives the runner to revolve and convert
hydraulic energy into mechanical energy and drives the rotor of
generator revolution by the force of the main shaft of turbine,
thus converting the mechanical energy into electric energy.
Horizontal/vertical Francis turbine
10m -- 300m.
0.1MW -- 20MW
Stainless steel (0Cr13Ni4Mo)
Governor, Inlet Valve, unit side panel, excitation system
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.